Linkpoint Aio Specs



Card Reader: Track 1 and track 2, bi-directional magnetic stripe card reader, track 1, 2 and 3 available upon special order.

Communications: Internal modem with 2 RJ-11 modular jacks
Standard asynchronous/synchronous;
300/1,200/2,400 bps standard Bell 103/212A series, V.22 BIS

Dimensions: Height: 3.16 in (80.32 mm)
Width: 5.86 in (149 mm)
Depth: 9.66 in (244 mm)

Display: Two-line
20 character
LCD back-lit display

Keypad: 30 key alphanumeric keypad
Audio feedback tone (short tone for legal key entry,
longer tone for illegal key entry)

Memory: 1 MB total; 512k battery-backed RAM; 512k flash

Microprocessor: Z180 CPU operating at 12.288 MHz

Operating: 32º to 104º F, 0º to 40º C

Environment: Humidity: 10% to 90% relative humidity; no condensation

Peripheral Ports: 1 6-pin DIN port for PIN pads, smart-card readers or bar-code wands and 1 8-pin RS232 serial port for check readers, etc.

Power Connector: 4-pin

Power: Voltage: 100-240 VAC (switching power supply)

Requirements: 50/60 Hz 0.8A
Power consumption: 350 mA, 2A during printing
Power adapter output: 7.5 VDC, 3 A (22.5 W)

Printer: Fixed thermal printhead
"EZ-load" drop-in paper loading system
Speed: 14 lines per second
Paper: Standard thermal roll, single-ply
Appleton 1012 sheet (recommended)
Paper width: 2.25-inch (58-mm)
Paper roll diameter: 1.9-inch (48-mm) maximum
Open cover/paper out sensor
Graphic printing capability
13 International character sets
Mechanical life: 15 million lines

Telco Connector: 2 Six-position modular jacks located on base of unit;
telephone line uses a 26 AWG (minimum) gauge cord

Weight: Shipping Weight: 3.4 lb. (1.54 kg)